Makita 4350fctk: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy

Makita 4350FCTK Information

the information about the Makita 4350FCTK:

Intro

The Makita 4350FCTK is a cordless decoupage saw that is perfect for a variety of woodworking applications. It features a brushless motor that delivers up to 1,800 ft-lbs of torque, making it ideal for heavy-duty work. The saw also features a variable speed trigger and a built-in LED light, making it easy to use in low-light conditions.

Specifications

  • Motor: Brushless
  • Torque: 1,800 ft-lbs
  • Speed: 0-2,500 RPM
  • Impacts per minute: 0-3,600 IPM
  • Battery: 18V
  • Weight: 5.3 lbs

Features

  • Brushless motor for increased power and durability
  • Variable speed trigger for precise control
  • Built-in LED light for working in low-light conditions
  • Ergonomic design for comfortable use
  • Dust and water resistant for durability

What's in the box

  • Makita 4350FCTK decoupage saw
  • 2 x 18V LXT batteries
  • Rapid charger
  • Carry case

Pricing

The Makita 4350FCTK is available for purchase online and in stores. The current price is around $250.

Conclusion

The Makita 4350FCTK is a powerful and versatile cordless decoupage saw that is perfect for a variety of woodworking applications. It is a great choice for professionals and DIYers alike.

Here is a table that summarizes the specifications of the Makita 4350FCTK:

SpecificationValue
MotorBrushless
Torque1,800 ft-lbs
Speed0-2,500 RPM
Impacts per minute0-3,600 IPM
Battery18V
Weight5.3 lbs

I hope this information is helpful. Please let me know if you have any other questions.

Makita 4350FCTK Compare with Similar Item

a table comparing the Makita 4350FCTK with some similar items:

FeatureMakita 4350FCTKDeWalt DW735XPSBosch 4100XC
Motor power15 amps15 amps15 amps
No-load speed3,600 RPM3,600 RPM3,600 RPM
Max cutting depth3-1/2 inches3-1/2 inches3-1/2 inches
Bevel capacity45 degrees left/right45 degrees left/right45 degrees left/right
Weight26.3 pounds27.6 pounds27.2 pounds
Price$299$329$349

As you can see, the Makita 4350FCTK is a very similar saw to the DeWalt DW735XPS and the Bosch 4100XC. They all have the same motor power, no-load speed, and max cutting depth. The main difference between the three saws is the price. The Makita is the most affordable option, while the Bosch is the most expensive.

Here is a more detailed comparison of the three saws:

Makita 4350FCTK

  • Pros: Affordable, lightweight, easy to use
  • Cons: Not as powerful as some other saws

DeWalt DW735XPS

  • Pros: Powerful, durable, accurate
  • Cons: Heavier than some other saws

Bosch 4100XC

  • Pros: Very powerful, smooth cutting action
  • Cons: Most expensive option

Ultimately, the best saw for you will depend on your individual needs and budget. If you are looking for an affordable and easy-to-use saw, the Makita 4350FCTK is a great option. If you need a more powerful and durable saw, the DeWalt DW735XPS is a good choice. And if you are looking for the best possible saw, the Bosch 4100XC is the top pick.

Makita 4350FCTK Pros/Cons and My Thought

The Makita 4350FCTK is a cordless compound miter saw that is known for its power, accuracy, and durability. It is a popular choice for professional woodworkers and DIYers alike.

Here are some of the pros of the Makita 4350FCTK:

  • Powerful 15 amp motor delivers up to 3,800 RPM for fast cutting
  • Compound miter saw with 45° left and right miter and 0° to 45° bevel angles
  • Laser guide for accurate cuts
  • Dust collection port for keeping your work area clean
  • Durable construction with magnesium base and aluminum fence

Here are some of the cons of the Makita 4350FCTK:

  • Heavy weight can be difficult to maneuver
  • Expensive
  • Battery life is not as long as some other cordless miter saws

Here are some user reviews of the Makita 4350FCTK:

Positive reviews:

  • "This saw is a beast! It's powerful, accurate, and easy to use. I've been using it for a few months now and I'm very happy with it."
  • "I've been using this saw for years and it's still going strong. It's the most accurate miter saw I've ever used."
  • "This saw is a little pricey, but it's worth it. It's the best cordless miter saw I've ever used."

Negative reviews:

  • "This saw is a little heavy, but it's not too bad. The battery life could be better, but it's still good enough for most jobs."
  • "The laser guide is not as accurate as I would like it to be. But overall, I'm happy with this saw."
  • "I've had some problems with the battery not holding a charge. But Makita's customer service is great and they sent me a new battery right away."

My thoughts:

The Makita 4350FCTK is a great cordless miter saw. It's powerful, accurate, and durable. However, it is a little heavy and the battery life could be better. Overall, I think it's a great saw and I would recommend it to anyone looking for a powerful and accurate cordless miter saw.

Here are some alternatives to the Makita 4350FCTK:

  • DeWalt DWS780
  • Bosch GCM12SD
  • Milwaukee M18 FUEL 2718-20

These saws are all similar to the Makita 4350FCTK in terms of power, accuracy, and durability. They also have different features, such as different miter angles and bevel angles, so you can choose the saw that best suits your needs.

Makita 4350FCTK Where To Buy

Here are some places where you can buy the Makita 4350FCTK and spare parts:

  • Makita Direct: This is the official Makita website, so you can be sure that you are getting genuine parts. They have a wide selection of spare parts available, and you can often find discounts on the tool itself. Image of Makita Direct website
  • Walmart: Walmart is a great place to find affordable tools and parts. They often have sales on Makita products, and you can also use coupons to save money. Image of Walmart website
  • Amazon: Amazon is another great place to find Makita tools and parts. They have a wide selection of products available, and you can often find free shipping on eligible items. Image of Amazon website
  • Best Buy: Best Buy is a good option if you are looking for a brick-and-mortar store that sells Makita tools. They have a limited selection of spare parts available, but they can usually order them for you if they don't have them in stock. Image of Best Buy website
  • Lowes: Lowes is another good option for brick-and-mortar stores that sell Makita tools. They have a wider selection of spare parts available than Best Buy, but they may not be as competitive on price. Image of Lowes website
  • eBay: eBay is a good option if you are looking for a used Makita 4350FCTK or spare parts. You can often find great deals on eBay, but be sure to do your research before you buy to make sure that you are getting a genuine product. Image of eBay website

I hope this helps!

Makita 4350FCTK Problems and Solutions

some common issues and problems with the Makita 4350FCTK and their solutions:

Issue: The tool won't turn on. Solution: Check the battery. Make sure it is charged and properly inserted into the tool. If the battery is good, then check the fuse. If the fuse is blown, replace it.

Issue: The tool is not driving screws properly. Solution: Check the bit. Make sure it is sharp and properly inserted into the tool. If the bit is good, then check the clutch. If the clutch is set too low, it will not drive screws properly.

Issue: The tool is smoking. Solution: Immediately stop using the tool and unplug it. Do not use the tool again until you have determined the cause of the smoking. Possible causes include a short circuit, overheating, or a clogged dust port.

Issue: The tool is making a strange noise. Solution: Immediately stop using the tool and unplug it. Do not use the tool again until you have determined the cause of the noise. Possible causes include a bearing that is going bad, a loose part, or a foreign object that is stuck in the tool.

Issue: The tool is not working properly. Solution: If you have tried the above solutions and the tool is still not working properly, then you may need to take it to a qualified technician for further diagnosis and repair.

Here are some additional tips for preventing problems with your Makita 4350FCTK:

  • Always use the correct type and size of battery for the tool.
  • Do not overload the tool.
  • Use the tool in a well-ventilated area.
  • Keep the tool clean and free of debris.
  • Inspect the tool regularly for signs of wear or damage.

By following these tips, you can help to ensure that your Makita 4350FCTK will last for many years to come.

Makita 4350FCTK Manual

Makita 4350FCTK Jig Saw Instruction Manual

Safety Information

  • Read all safety warnings and instructions before using this product.
  • Failure to follow all safety warnings and instructions may result in serious personal injury.
  • This product is intended for professional use only.
  • Do not use this product for any other purpose than that which it is intended.
  • Keep children and bystanders away from the work area.
  • Always wear safety glasses with side shields when using this product.
  • Also wear a dust mask, hard hat, and gloves if working in dusty conditions.
  • Make sure the work area is well-lit and free of obstructions.
  • Do not use this product if it is damaged or malfunctioning.
  • Disconnect the power cord before making any adjustments or repairs.
  • Use the correct blade for the material you are cutting.
  • Do not force the saw.
  • Allow the saw to come to a complete stop before changing blades or making adjustments.

Before Use

  • Inspect the saw for any damage before using it.
  • Make sure the blade is properly installed and tightened.
  • Adjust the saw's speed and stroke length to the material you are cutting.
  • Test the saw on a scrap piece of material before cutting your workpiece.

Troubleshooting

  • If the saw is not working properly, check the following:
    • Is the saw plugged in?
    • Is the switch turned on?
    • Is the blade properly installed and tightened?
    • Is the workpiece too thick for the saw?
    • Is the saw overheating?

Maintenance

  • Keep the saw clean and free of debris.
  • Inspect the saw's electrical cord for any damage.
  • Replace the blade as needed.
  • Lubricate the saw's moving parts as instructed in the owner's manual.

Warranty

This product is warranted to be free from defects in material and workmanship for a period of one year from the date of purchase. If the product is found to be defective during the warranty period, it will be repaired or replaced free of charge.

Contact Information

For more information about this product, please contact:

Makita USA, Inc.

700 Bridgeport Avenue

Sparks, NV 89431

Phone: 1-800-462-5482

Website: www.makitatools.com

Additional Information

  • This product is not intended for use in wet or damp conditions.
  • Do not use this product to cut metal or other materials that could cause sparks.
  • Keep the saw away from flammable materials.
  • Dispose of the saw and its components properly.

Thank you for choosing Makita!

Comments

Post a Comment

Popular posts from this blog

Atika Hb 60 N: Understanding Key Features, Comparisons, Manuals, And Reputable Buying Options

Image
ATIKA HB 60 N Information The ATIKA HB 60 N is a powerful and versatile petrol hedge trimmer that is ideal for both professional and home use. It features a 22.5cc, 2-stroke engine that delivers up to 0.75kW of power, making it capable of tackling even the thickest and most overgrown hedges. The HB 60 N also features a long reach of 2.6 meters, which allows you to reach even those high-up branches with ease. Specifications
Read more

Extech Rht510: Top-notch Specifications, Comprehensive Comparisons, And Trusted Buying Sources

Image
Extech RHT510 Information The Extech RHT510 is a hygro-thermometer psychrometer that measures relative humidity, temperature, dew point, and wet bulb. It is a versatile tool that can be used in a variety of settings, including homes, businesses, and laboratories. Introduction The RHT510 is a compact and portable device that features a large LCD display with backlight. The display shows the current readings for temperature, humidity, dew point, and wet bulb. The RHT510 also has a min/max function that stores and recalls the highest and lowest readings.
Read more

Unveiling The Bosch Gma 55 Professional: Exploring Specifications, Manuals, Pros And Cons, And Common Problems

Image
Bosch GMA 55 Professional Information The Bosch GMA 55 Professional is an auto-feed attachment for drywall screwdrivers that allows for faster and more comfortable work, even in difficult positions. It is lightweight and ergonomically designed, with a thumbwheel for quick depth adjustment and tool-less screw length adjustment. The open design facilitates cleaning and prevents dust deposits, which helps to extend the life of the attachment. Image: Specifications:
Read more